Rubber Data Sheets
Below you will find rubber data sheets for the most commonly specified rubber compounds we use. However, we also specialise in developing specific compounds for rubber seals, gaskets and mouldings to meet the harshest conditions and highest tolerances. If you cannot find the material you require, or need assistance, just get in touch using our enquiry form.
Other resources to help you:
- Use our Chemical Compatibility Database
- Download our white paper Guide to Developing Custom Rubber Seals.
- Watch our ‘In Conversation‘ Videos for plenty of tips and advice.
Visit our rubber materials pages
EPDM 20/25 datasheet
This formulation is based on a high molecular weight EPDM polymer highly extended with paraffinic oil to give low hardness.
Fluorosilicone 60 Datasheet
This formulation is pigmented with Red Iron Oxide to enhance the hot air resistance to meet DTD5583 Grade 60.
EPDM 70 datasheet
This compound was developed to meet DTD5597A Grade 70. The scope of DTD5597 covers preparations intended for the production of […]
FFKM 80 HT datasheet
This formulation has been developed for sealing applications at very high temperatures and for aggressive chemicals.
Natural 40 datasheet
This formulation has been developed to comply to BS1154 Z40, which is a general purpose Natural Rubber filled with carbon […]
Neoprene 70 datasheet
PCR 65/70 Conductive. The information below is based on a judgement of what 3073M010 might give if it were tested.
Nitrile 60 datasheet
This formulation is based on a medium ACN Nitrile polymer filled with carbon black and cured with a sulphur/accelerator system.
Silicone 60 datasheet
This formulation is pigmented with Red Iron Oxide, which is a pigment that also acts to enhance the heat resistance […]